Model #H0062
Retail Price $8,395.00

Click here to view DustPro™ HEPA Vacuum Videos

The DustPro™ 600 is designed for capturing saw dust from wood flooring applications. It produces 600 CFM and features a 50 gallon canister that is easily removed for emptying.  Contractors like how the unit is price considerably lower than competitive HEPA vacuums and the AirBender™ technology enables them to go up to 10 times longer between filter cleanings. This workhorse vacuum has fewer moving parts, and no solenoids, to require less maintenance and provide more reliable performance.

The DustPro 600 comes standard with hose: 3"x 25’.  It has enough power to run efficiently up to 125’ from the vacuum. It has capacity to sand 1000-1200 sq ft before removing the plastic collection bag, and comes standard with plug for your belt machine so you only need one power cord from the 240 volt power source. This system, although set up for 1 belt machine and 2 edgers, can be also used with a gym floor rider, collecting dust from two 12” drum machines run at full speed.

DustPro™ 600 delivers far greater productivity
The best way to get high productivity out of any HEPA vacuum is to keep the filter clean. That doesn’t mean pulsing every 15 seconds to blow dust off the pleats. It means keeping dust away from the HEPA filter to begin with. That is the way the DustPro™600 HEPA Vacuum, with Air-Bender™ technology, increases productivity.

The truth about pulse cleaning
Pulse cleaning every 15 seconds is hard on HEPA filters. Violent bursts of air explode - thrusting abrasive granules against the delicate filter material, damaging the microscopic fibers and shortening the HEPA filter’s life. DustPro™ vacuums are much kinder to your HEPA filters, requiring pulsing 1, instead of, 240 times each hour.

Why the DustPro™ requires less maintenance
The moving parts associated with automated pulse-cleaning systems (solenoids) are subject to frequent breakdowns. DustPro™ vacuums have no solenoids - only mechanical switches - proven to be reliable when exposed to constant vibration, dust and other harsh conditions.

How the DustPro™ extends cleaning intervals 10 times longer
Air-Bender™ technology greatly increases cleaning intervals by doing a superior job of capturing dust BEFORE it reaches the HEPA filter. The Air-Bender™ cyclone captures 99% of airborne dust compared to typical cyclones, which capture only 80%.

How Air-Bender™ technology works
The Air-Bender™ cyclonic system “bends” the air stream at the bottom of the canister, and allows 98% of the dust to settle in a large Passive Air Zone before the air moves on to the HEPA filter canister. By allowing only 2%, instead of 20%, of the dust to reach the HEPA filter, Air-Bender™ technology enables contractors to go 10 times longer between cleaning intervals.

Features:

• Save money by extending the life of your HEPA filter
• Go 10 times longer between filter cleaning intervals
• Extend HEPA filter life with Air-Bender™ technology
• Capture 98% of dust BEFORE it reaches the HEPA filter
• Stop guessing - a gauge tells you when to clean filters
• Transport with ease – separate components are light weight
• Meet government standards with certified HEPA filters
• Collect saw dust from ANY size of floor sander
• Reduce maintenance - NO solenoids!
• Extend motor life with tangental air bypass cooling
• Run on two 120v circuits or a single 240v circuit
• Choose from a 50 gallon canister

Motor: Dual 2.1 HP Tangential bypass
Power: 3120 watts
Voltage: Dual 120v 50/60hz input or 240v single phase 50/60hz with neutral. Cords not included.
Amperage: 120v 13 amps each input, 240v 13 amps single input
Water lift: 70 in
CFM: 624
Peak / amps: 13 amps. 15.5 peak
Watts: 1753
Noise level: 79 DB
Stage Motor: 1 stage motor 120V
Filter: 31.19 SQFT
Efficiency Rating: 99.97% Efficient @ 0.3 Micron
Filtration: Certified HEPA rated 99.97% @ .3 micron with AirBender™ Cyclone
Hoses: One 3" x 25' hose, additional sizes available